I need a set by Wednesday for an A36. Is it possible if I get the details in am?

I tried to replace the big o ring on my GABB cap with M25988/1-339, but it seemed slightly larger than the Nitrile that was currently on there. Should it be a snug fit? I'm wondering if M25988/1-338 would fit more securely. Thoughts?

Nope, keep that -339. That nitrile ring is probably a -338 because when the last person took it apart and put it on, it looked small. Plus the IPC calls for a -339 size o-ring. So reassemble the fuel cap with that -339 o-ring on it and it will be nice and snug. That fuel cap "pops" the -339 o-ring out so it creates a bulbous fit.

I have an excellent inventory of these fluorosilicone fuel cap o-ring kits ready to ship. They ship via USPS First Class mail.

I just received more o-rings in stock and have an excellent inventory of the Shaw 416, 516, 431, 531, and Gabb fuel cap o-ring kits in stock. Couple them with the Marsh Brother GF washers for your fuel caps and they will operate like new!

www.gallagheraviationllc.com/products <-- Order here.

I have more fluorosilicone fuel cap o-ring kits shipping out today. All models are in stock with plenty of inventory. These are spectacular with the Marsh Brother washer kits.

Got mine in the mail yesterday! Thanks James for the fast shipping. Looking forward to making my caps operate smoother in a couple weeks at annual.

I have more fluorosilicone fuel cap o-ring kits shipping out today! These are a must have product for your fuel caps especially with the flying season upon us!

www.gallagheraviationllc.com/products - Order here.

I have an excellent inventory of these gas cap kits. If you are not sure of what type of fuel cap kit, snap a photo of the top and bottom of the cap and email it to me at gallagheraviationllc@gmail.com

https://www.gallagheraviationllc.com/products.html <-- Order here
gallagheraviationllc@gmail.com <-- Email me here
1-833-425-5288 <-- Call me here

I have an excellent inventory of various fluorosilicone fuel cap o-ring kits. If you are in annual and you have not installed new o-rings on your fuel caps, these are a must. Here is a link to my new website for easy ordering.

https://www.gallagheraviationllc.com/Ai ... _c_36.html
Gallagheraviationllc@gmail.com <-- Not sure what to get? Send me a photo of the top and bottom of the fuel cap.

James, I sent an email about the seal kit I received from you. If you did not receive it please email me at ckearnsconsulting@gmail.com.

Thank you
Charlie

Responded.

It has been a while since I have visited this thread but these fluorosilicone fuel cap o-ring kits are probably the best value you will ever get for your Beech. We have shipped thousands of these kits and have an excellent inventory of all of them ready to go. Below is the new link to our website and if you are not sure what to get, email us a photo of the top and bottom of your fuel cap and I'll let you know what you have. I installed mine in 2016 and they are still going strong!

https://www.gallagheraviationllc.com/Ai ... _c_36.html <-- Link to website.

gallagheraviationllc@gmail.com <-- Email
1-833-425-5288 <-- Call, leave a voicemail if I do not answer please
513-401-6495 <-- Call/Text/MMS, lease a voicemail if I do not answer please

I have an excellent inventory of these fluorosilicone fuel cap o-ring kits. Mine have been on my fuel caps for nine years until recently. I only changed them because I bought all new fuel caps when I painted N11GG. These are the cheapest most effective insurance around for airplanes. If you're not sure what to get, send me a photo of the top and bottom of the fuel cap so we can get it right. You can also text them to me.

gallagheraviationllc@gmail.com <-- Email me here
513-401-6495 <-- Text me here

https://www.gallagheraviationllc.com/Ai ... _c_36.html <-- Link to my website