King KFC 200 autopilot with yaw damp removed in August.

Heading and Altitude were holding well when removed. Was hunting a little bit on GPS approaches hence the reason for removal. Probably can go to a competent repair shop for checkout and adjustment to get it back to solid.

Flight Computer KC 295 S/N 1555 Adapter card 06 P/N 065-0034-00
Yaw Computer KC 296 S/N 1513 P/N 065-0036-00
Yaw Servo KS 271 S/N 2030 P/N 065-0028-00
Trim Servo KS 272 S/N 1776 P/N 065-0029-05
Primary Servo KS 271 S/N 10342 P/N 065-0028-00
Pitch Servo KS 270 S/N 3433 P/N 065-0027-01
Rate Gyro Mount KG 257 S/N 4771270 P/N 071-4027-01
Servo Mount KM 276 S/N 7703 P/N 065-0031-00
Mode Controller KC 290 S/N 1608 P/N 065-0033-00

Also included are the connectors, mounting brackets, computer tray, capstans, disconnect switch.

Don't have the trim switch as it was previously sold to my A/P since his was cracked.

Edit: added part numbers. Can be used 14V or 28V

Bump

Part numbers for each item is more important than serial numbers.

Thanks Bruce. Part numbers now added.

I understand you listed the lot for sale. If you are willing to parting it out, I would be interested in the Primary Servo KS 271 S/N 10342 P/N 065-0028-00
Pitch Servo KS 270 S/N 3433 P/N 065-0027-01. I will offer $250 for the two.

As noted by another BT'r, this can be used either 14v or 28v.

Reduced to $900+shipping