I have a couple inertial reels including belts plus a couple with housings which I believe came off a B60 Duke. I am unsure as to commonality with the other Beech belts. A couple of part numbers (or partial part numbers) might help. Take a look at the pictures. I also have a set of older (new?) belts with buckle logos in beige. Have not opened the package, but if there is interest and you require lengths, I can do that for you. See pics.

9/16/19: The tan seat belt pair have been sold. Others still available.

Retracters: $125 each
Two belt units (4-segments): $100

The BEIGE belts have been SOLD. The shoulder belts and retract reels are still available

Dan
.

Are there no P/n’s on the ends “White part” of the retractors?

The tags on the belts are as follows:

Beige: 101-530604-33
Red: 130498C 19-39
Black: CM 4005-32 / Model# 9600-5

The numbers on the tags are difficult to read, so there might be a error in a digit or two.

I'll have to go back to the hangar to check the retractors again to see if I can find additional PNs.

Dan